The maintenance of compression air compressors mainly includes the following aspects:
Daily inspection and maintenance:
Check the operating status of the air compressor: Observe the operating parameters of the air compressor, such as pressure, temperature, current, etc., to ensure that they are within the normal range.
Check the air filter: Clean or replace the air filter regularly to ensure the cleanliness of the air entering the air compressor.
Check the oil filter: Replace the oil filter regularly to ensure the cleanliness of the lubricating oil.
Check the cooler: Clean the dust on the surface of the cooler to ensure the heat dissipation effect.
Check the oil level: For oil-lubricated air compressors, check the oil level regularly to ensure that it is within the specified range.
Drainage: After work every day, drain the water at the bottom of the gas tank and check the drain valve regularly to see if it is working properly.
Regular maintenance:
Replace the lubricating oil: According to the use environment and operating time, replace the lubricating oil regularly and ensure that the oil level is always within the normal range.
Replace the air filter and oil filter: Clean or replace the air filter and oil filter regularly to ensure air quality and lubrication effect.
Check the belt and bolts and nuts: Check the belt tightness and whether the bolts and nuts are loose regularly, and adjust and tighten them in time.
Clean the cooler: After running for about 2000 hours, remove the dust on the heat dissipation surface to ensure the heat dissipation effect.
Maintenance of key components:
Oil filter: It must be replaced 300-500 hours after the first start-up, and then replaced every 2000 hours.
Intake valve: Clean the carbon deposits on the intake valve plate regularly to ensure stable gas volume.
Bearing: Check the wear of the bearing regularly and replace it if necessary.
Electrical components: Check electrical components such as contactors and circuit breakers regularly to ensure their normal operation.
The above maintenance and care measures can effectively extend the service life of the compression air compressor, reduce the failure rate, and improve production efficiency.
