在线客服
Apr 08, 2025 Leave a message

Working principle of screw air compressor

The screw air compressor realizes gas compression through a pair of intermeshing spiral rotors (male rotor and female rotor). Its working principle can be summarized as three stages of "intake-compression-exhaust":

‌Intake stage‌

‌Rotor rotation‌: The motor drives the male rotor to rotate, and the female rotor rotates synchronously with the male rotor through synchronous gears or direct meshing. The spiral tooth grooves of the rotor form a new space volume during the rotation process. ‌‌
‌Gas suction‌: The pressure at the air inlet is lower than the internal pressure of the compressor, and the gas is sucked into the inter-tooth volume under the action of the pressure difference. As the rotor continues to rotate, the inter-tooth volume gradually increases, and the gas continues to enter until it reaches the maximum value. ‌‌
‌Compression stage‌

‌Volume reduction‌: The male rotor and the female rotor continue to rotate, the inter-tooth volume begins to decrease, and the gas is enclosed between the teeth and compressed. As the volume continues to decrease, the gas pressure and temperature gradually increase. ‌‌
‌Oil injection cooling‌ (oil injection screw air compressor): During the compression process, the lubricating oil is sprayed into the compression chamber through the oil injection hole to mix with the high-temperature and high-pressure gas. The lubricating oil plays the role of cooling, sealing, lubrication and noise reduction, and at the same time takes away the heat generated during the compression process. ‌‌
‌Exhaust stage‌
‌Gas discharge‌: When the inter-tooth volume rotates to the exhaust port position, the gas pressure is higher than the exhaust pipe pressure, and the gas is discharged from the compressor. The exhaust process continues until all the gas in the inter-tooth volume is discharged. ‌‌
‌Oil-gas separation‌: The oil-gas mixture enters the oil-gas separator, and the lubricating oil is separated by centrifugal force, gravity and filtration. The separated compressed air enters the post-processing equipment (such as dryers, filters) for further purification. ‌‌
Screw air compressors have the advantages of high efficiency and stability, low maintenance cost, and a wide range of applications, and are widely used in industrial production. ‌‌

Send Inquiry

whatsapp

Phone

E-mail

Inquiry